Pebbled Glass Floor Tile.
Perfect for walls, showers and floors.
See Image Below
We now carry A 12" x 12" and 6" x 6" Glass floor tile. These glass tiles are the first dye-sublimation tiles to meet ANSI and ASTM standards for residential AND commercial wall or FLOOR applications. Images are applied to the backside of the glass to protect the dyes from wear and abrasion. Perfect for floors, walls showers and backsplashes.
Tempered glass tiles cannot be cut, so for applications where cutting is necessary (corners, holes, etc. in floor installations), you would order non-tempered tile. Tempering is added to the larger tiles for strength. The 6" x 6" tiles met the ANSI and ASTM standards below without tempering. The 12" x 12" tiles are offered in tempered and non-tempered. For the 12" tile installations, you would want to use the tempered tiles except where cutting is needed. The non-tempered tile may be cut with a glass cutter, or a tile saw (wet saw application, new diamond blade) or using a waterjet cutting service (check your local vendors). We recommend using an Epoxy Thin-Set mortar in white for mounting the textured glass tile in any application. we recommend ONLY Megaflex Ultimate Thin-Set Mortar in white for ANY glass tile installation. It is manufactured by Custom Building Products (www.custombuildingproducts.com), and should be fairly readily available in your area. The website should direct you to distributors in your area.This adhesive should be readily available in most areas, and has exhibited superior bond strength without damaging the white backing on the tiles. You should use a grout specifically formulated for use with glass tile. Tiles can be cleaned with any household non-abrasive cleaner and a soft cloth or sponge.
For Outside tile council testing data click here
An Installed floor tile mural.